Jacobsen tournament cut 22 Скачать руководство пользователя | Manualshive

Страница: 5 / 84

background image

SAFETY 1

GB-5

1.2

IMPORTANT SAFETY NOTES ________________________________________________

This safety alert symbol is used to alert you to potential hazards.

DANGER

- Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

WARNING

- Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious

injury.

CAUTION

- Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury

and property damage. It may also be used to alert against unsafe practices.

For pictorial clarity, some illustrations in this manual may show shields, guards or plates open or removed. Under no
circumstances should this equipment be operated without these devices securely fastened in place

By following all instructions in this manual, you will prolong the life of your machine and maintain its maximum
efficiency. Adjustments and maintenance should always be performed by a qualified technician.

If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the
latest methods to service this equipment and can provide prompt and efficient service. Use of other than original or
authorized Jacobsen parts and Accessories will void the warranty.

WARNING

The Operator Presence Control (OPC) on this machine will shut off the reel
and traction drive if the operator releases the OPC bail.

To protect the operator and others from injury, never operate equipment with
the OPC system disconnected or malfunctioning.

!

!

WARNING

1.

Before leaving the operator’s position for any reason:

a.

Disengage all drives.

b.

Engage parking brake.

c.

Stop engine.

2.

Keep hands, feet, and clothing away from moving parts. Wait for all
movement to stop before you clean, adjust or service the machine.

3.

Keep the area of operation clear of all bystanders and pets.

4.

Chock or block the wheels if the machine is left on an incline.

5.

Never operate mowing equipment without the discharge deflector
securely fastened in place.

!

«
...
3
4
5
6
7
...
»

Содержание tournament cut 22





















































































Отзывы:

Нет отзывов

Похожие инструкции для tournament cut 22

Бренд: jcb Страницы: 122

Бренд: Zenoah Страницы: 20

MULTI-VANE 1800 Series

Бренд: Ingersoll-Rand Страницы: 12

Бренд: Amico Страницы: 47

Бренд: Onan Страницы: 341

HP525 EFI Bravo Sterndrive Series

Бренд: Mercury Racing Страницы: 147

Бренд: Selve Страницы: 24

Бренд: Quectel Страницы: 165

Бренд: Volvo Penta Страницы: 96

Бренд: Toro Страницы: 233

Бренд: VM Страницы: 108

Бренд: Briggs & Stratton Страницы: 16

Бренд: Roto Страницы: 9

Diesel Engine S12A2-Y2PTAW-2

Бренд: Mitsubishi Страницы: 3

Бренд: Takegawa Страницы: 21

Бренд: DAYE Страницы: 80

Бренд: Nabtesco Страницы: 31

Бренд: IronHorse Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды