Jackson RackStar 44, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 80

21
07610-004-33-05-B
Before operating the unit, verify the following:
• The strainers are installed.
• The drain valve is closed.
• The actuator switches move with relative freedom and do not bind.
• The curtains are installed correctly.
To place the unit in standby, press the START button on the display.
• The unit will automatically determine if there is proper water level in the wash tank. If
not, the unit will begin to fill until the appropriate level is reached.
• If the wash tank temperature is not at the minimum level for the mode of operation, the
wash heater will energize. Refer to the machine data plate for a better understanding of
the minimum temperatures needed to operate the unit correctly. It might take several
minutes for the wash tank to heat up, depending on the initial temperature of the water.
• If the machine is equipped with a rinse booster option, the booster will turn on when
the unit turns on.
• If the machine is heated with a steam booster, the steam booster must be turned on in
accordance with the manufacturer's instructions.
•
Do not attempt to start the unit until:
1
. The unit stops filling.
2 . The unit has reached the appropriate wash tank temperature.
OPERATION
OPERATING INSTRUCTIONS
PREPARATION
POWER UP
i