JackaJay USER GUIDE
17
You must connect the clamps onto the correct terminal on the battery. Incorrect
connection may cause irreversible damage to the controller.
RED clamp - Clamp onto Positive (RED) terminal on the battery.
BLACK clamp - Clamp onto the Negative (BLACK) terminal on the battery.
Insert the plug end of the jumper lead into the bottom of the
controller. You should hear a small click when the retaining clip
locks into place. If necessary, slide the dust cover back gently,
and insert the plug, then slide the dust cover back up into place.
Turn the JackaJay controller ON and conduct the required
operation.
Turn OFF the JackaJay controller.
Thereafter, carry out the above steps in reverse to
reinstate the permanent lead. Also ensure that the controller is
turned OFF and all dust covers are reinstated.
