JackaJay USER GUIDE
8
3.1.1 Turning the System ON and OFF
3.2
Controller / Push button ON
and OFF indication
The JackaJay controller is turned ON
and OFF via a small button found to
the left side of the controller’s touch
screen.
The user must confirm that correct
supply voltage of (12V DC) is
available with correct polarity,
before powering ON the controller.
When the controller is OFF, the button will be flushed with the front of the
control box and the Blue backlit LED will be OFF.
When ON, the button will be slightly pressed in from the front of the
control box and the Blue backlit LED will be ON.
Take note that the LCD touchscreen has a time out function and will go
blank after 5 minutes. This IS NOT an indication that the controller has
been turned OFF.
If the LED touchscreen has Timed Out and goes blank, touch the
touchscreen; if the controller is ON the screen will come back ON.
If the screen does not turn ON, check the Push button indicators, as
explained above. If the controller is not being used, ensure that the
controller has been turned OFF.
DO NOT turn ON the controller if the battery connection has not been completed.
If the JACKAJAY power supply cable is required to be disconnected from the
battery, you must ensure that the JackaJay controller is turned OFF.
