9
STEP 1:
Locate removable juice spout locking mechanism on
the bottom side of the receptacle. Note: Juice spout
will be in the locked position.
TO CLEAN THE
JUICE SPOUT
STEP 2:
To unlock, turn locking mechanism counter-clockwise,
lining up notch with juicer spout hinge pivot arm.
STEP 3:
Lift up juice spout carefully from receptacle and
remove to clean.
TO REATTACH:
Insert juice spout back into original
position and turn the locking mechanism clockwise to
lock into place.
IMPORTANT: When reattaching juice spout back
into original position make sure juice spout is in the
locked position and tightly secured before use .
Juice
Spout
LOCKED POSITION
Locking
Mechanism
1
UNLOCKED POSITION
Hinge
Pivot Arm
2
3
CLEANING YOUR JUICER
We have made juicer clean up as easy as possible. All of the components, with exception of
the motor base, can be put in your home dishwasher. We recommend top rack placement as
temperatures near the bottom drying element may vary with manufacturer.
Caution:
Some commercial and foreign made dishwashers may reach internal temperatures
that are higher than machines made for home use by U.S. standards. Do not use these
dishwashers with your Power Juicer. The higher temperatures may cause damage to your
juicer. Check with your dishwasher manufacturer before using.
For easiest clean up, we recommend you rinse/clean your Power Juicer immediately after
juicing. This will help prevent fruit/vegetable fibers from hardening on the components,
making it more difficult to clean.
• Turn off the Power Switch and wait until the motor completely stops.
• With dry hands, unplug the AC cord from electrical outlet.
• Disassemble the machine. (See disassembly instructions pages 6-7.)
• Wipe Base with a soft damp cloth or sponge. Do not submerge Base in water. Do not
spray the Base with water or any other liquid. Base is not dishwasher safe. IMPORTANT:
Do not use abrasive sponges, cloths, or cleansers as these can damage the finish.
• Clean all other parts in warm, soapy water. A mild detergent is recommended. Rinse well
and dry thoroughly.
• To clean the Filter and Blade, hold them under warm running water. Use a bristled dish
washing brush to gently clean pulp from Filter. Rinse the Filter from the outside under
running water. If your sink has a spray hose attachment, this is especially effective for
loosening fiber from the Filter and the Blade before placing them in the dishwasher.
• Dry components thoroughly then assemble the machine and turn the power on to spin out
any excess water.
• Make sure unit and parts are completely dry, then store in a cool, dry place.
