7
ASSEMBLY
Assemble as shown
STEP 2:
Place receptacle on the base, with
juicer spout facing direction of locking
bar. Settle receptacle into alignment.
STEP 3:
Place filter inside receptacle, matching
the opening on its bottom to the
screw peg connected to the base.
STEP 1:
Place base on a dry flat surface with
locking bar in down position as shown.
In front of the machine (spout side).
1
Front of
Machine
(Spout side)
Locking
Bar
Base
Filter
Receptacle
3
4
Blade
Filter
Crescent
Tool
Blade
Holes
STEP 4:
Place blade inside filter, centered
over screw peg. Using black crescent
tool, place its pegs into the holes in
the blade and turn clockwise until
tightened.
IMPORTANT:
Do not over tighten
as the screw peg will break. Remove
crescent tool and set aside.
CAUTION:
Do not leave tool inside juicer.
2
Lip
Receptacle
Juice Spout
Base
