JAC HFC1061, Руководство пользователя

Страница: 8 / 56

choosing different air speed and
direction of air sending.
Operation
1. Start the engine.
2. Press Switch 4 of the air condi -
tioner to start air sender. The switch
has four grades from left to right to
make the air speed more and more
quick as well as making air stronger
and stronger.
3. Operate air-conditioner Switch 5,
then the compressor begins to work
and the whole system works too.
4. When using cold wind, please put
the Temperature adjusting handle 3
to the COOL position. When using
warm wind, put it to the HOT
position.To have air sending from
different directions, please adjust
Handle 2. To use warm wind only,
please close Switch 5 of the air -
conditioner.
5. Operate Handle 1 on natural wind
conversion position to have natural
wind outside come into the cab.
10
OWNER 爷 S MANUAL for
HFC1061,HFC1063,HFC1083
series trucks
Caution!
1. Avoid putting the handle to the
coldest position and pressing the
air speed switch on the lowest
position when using the air -
conditioner in order to prevent
evaporative machine from frosting.
2. Do not park the vehicle under
the sun .
3. Close the door and windows of
cab when using air-conditioner.
4. Use compressed air and cold
water to wash the condenser. (hot
water and steam are forbidden)
5. Have the compressor worked
for 5 minutes once a week in
winter to maintain the air condi -
tioner work normally.
6. Make sure the temperature of
water used to cold the engine reach
to 70
益 above when using air heater
and you should use antifreeze fluid
to avoid freezing radiator and inside
of air heater to be cracked.
7. If you do not understand the
structure and have no measures of
The top of cab's ventilating device
You can choose two ways to
ventilate the cab. Outdoor airiness
and indoor airiness
Outdoor airiness
1. Clockwise the rotary-knob on the
top of cab to make sure the top cab
closed.
2. Turn on the switch to "IN", then
turn on the rotary knob to "OPEN".
Indoor airiness
1. Clockwise the rotary knob to close
the ventilator louver.
2. Turn the switch to "out "which is on
the exhaust gear.
Door
1. The cab door, which has three -
step opening, can improve the
convenience for passengers to get
on or to get off. The partial opening
angle can be 30
益 and 57 益 . And
the full opening angle can be 90 益 ,
on all of the three positions, the door
can be in stable condition. (figure
above)
Outside door handle (left) Lock of
door locking(right)
Pull out the outside door handle to
open the door. Insert the starting
switch key into the door lock and
11
protection, please do not switch
on the system of air conditioner to
avoid accidents