11
10
Using your JABRA FreeSpeak headset
About the MiniGel™
If this is your first JABRA product, you may be new to the MiniGel,
which is an evolution of JABRA’s EarGel
®
. The soft ergonomic gel tip
fits on the end of the FreeSpeak that is partially inserted into your ear
canal. It channels sound directly into your ear for better reception.
This improves your ability to hear conversations clearly, even when
your local environment is noisy. The MiniGel works for either the left
or right ear, depending on your preference. To care for your MiniGel,
remove it from the headset by gently lifting and pulling it off the
speaker housing. Then, wash it in warm, soapy water. Never use your
FreeSpeak headset without a MiniGel.
Choosing left or right ear wearing style
FreeSpeak can be worn on either ear. The MiniGel is attached in the
factory for wearing in the right ear. To reposition it for wearing in
the left ear:
1.
Carefully remove the MiniGel by gently lifting and pulling it off
the speaker housing.
2.
Rotate the MiniGel 180 degrees from its original orientation.
3.
Replace the MiniGel onto the speaker housing.
Placing the headset on your ear
Initially, you may find it convenient to use a mirror as you follow the
instructions below. After some practice, you should be able to place
the headset on your ear with just one hand.
Using the audio socket adapter
Some mobile phones do not have standard sockets for headsets
to be connected. Nevertheless, these phones often have adapters
available to make your phone compatible with standard headsets.
Depending on the JABRA FreeSpeak version (see
FreeSpeak models
)
that you purchased, your package may include a JABRA audio
socket adapter.
To connect the multi-adapter to your phone using the audio
socket adapter:
1.
Plug the audio socket adapter to your phone.
2.
Plug in the jack from the multi-adapter to the audio socket adapter.
Attaching the multi-adapter clip
The multi-adapter can be fastened to a belt or purse using the
supplied clip. To attach the clip:
1.
Locate the two slots on the multi-adapter as shown below.
2.
Position the clip with one flange in one slot. (Ensure that the
hinge of the belt clip is in the same orientation relative to
the multi-adapter as shown.)
3.
Press clip gently onto the multi-adapter until the other flange fits
into the other slot securely. You should hear a clicking sound when
the clip is correctly attached.
1.
Place headset behind your ear
2.
Loop top of headset over front of ear
3.
Insert MiniGel into ear canal
1
2
3
1
6190
2
ja-126FrSpkMnlNonBlue10/14 10/14/02 6:46 PM Page 14
