8
The headset’s visual indicators
Headset mode
Headset indicator
Power Off
OFF (no charger)
Charging in Process
ON (charger plugged in, or headset placed in base)
Charging Complete
OFF (charger plugged in, or headset placed in base)
Pairing Mode
ON (no charger)
Pairing Successful
Series of 10 rapid flashes
Audio Link (on a call)
Frequent flashes
Headset ON
Continuous single flash (slow)
Headset ON and in range of the base
Continuous double flashes (slow)
Headset turn on/off
5 flashes (fast)
Test link established
Frequent flashes
The base’s visual indicators:
Base’s on-line indicator
On-line indicator
On-line with a call
Flashes
Base’s pairing indicator
Pairing indicator
Pairing Mode
ON (solid blue light)
Pairing Successful
Series of 10 rapid flashes
Base reset Successful
Lights for two seconds
Base’s battery indicator
Battery indicator
Battery indication
Number of lit indicators indicates level of charge
1 lit indicator = 25% charged
2 lit indicators = 50% charged
3 lit indicators = 75% charged
4 lit indicators = 100% charged
ALL base’s indicators
All indicators
Power is turned ON
Light up for 3 seconds.
5. Troubleshooting
I’ve set up my GN 6210, but I still don’t hear a dial tone?
There are several possible reasons why you do not hear a dial tone. Check that:
•
The various cords are correctly set up and inserted. See section 2 in the quick set-up guide for setting
up and connecting cords instructions.
•
The clear dial tone adjustment (using the Clear Dial Tone Adjustment Switch at the bottom of the base)
is correct. See Section 4.5 in the quick set-up guide for information on clear dial tone adjustment.
•
The power supply is correctly hooked to the base.
•
You have not unplugged your desk telephone’s telephone line.
Why don’t I get sound in my headset when using my mobile phone?
1. Verify that you’re your headset is switched on.
2. Verify that you have paired the headset with your mobile phone
3. Consult section 3.2 in the quick set-up guide for operating details
GN6210_UG_4.10 04/10/04 14:55 Side 8
