J2D EA2147A, Инструкция по эксплуатации

Страница: 16 / 24

16
AFTER SALES SUPPORT
AUS 1300 777 137 NZ 0800 824 556 EMAIL service@unclebills.com.au
Instructions (cont.)
Using the RCA Audio Output
The Turntable Briefcase features an RCA Audio Output located on the rear of the unit, which allows you
to connect the Turntable Briefcase to external speakers. To use the RCA Audio Output, follow the steps
below.
1. Turn the Power/Volume Dial clockwise until you hear a ‘click’ sound. The LED Display Screen
will show the welcome message HI briefly, then show -PHO indicating that the Turntable mode is
active. This is the default setting for the Turntable Briefcase.
2. Plug the AV connections of the RCA cable (not included) into the RCA Audio Output.
NOTE: The red and white coloured AV connections should be connected to the matching red and
white AV connection sockets.
3. Insert the other end/s of the RCA cable (not included) into the audio input of the external speakers.
NOTE: The volume can only be controlled on the connected speakers.
Recording from the Turntable to USB Drive / Micro SD Card
The Turntable Briefcase features a recording function allowing for vinyl records to be recorded to USB
drive or Micro SD card. To use the recording function, follow the steps below.
1. Turn the Power/Volume Dial clockwise until you hear a ‘click’ sound. The LED Display Screen
will show the welcome message HI briefly, then show -PHO indicating that the Turntable mode is
active. This is the default setting for the Turntable Briefcase.
2. Insert either a USB drive or Micro SD card into the LED Control Panel.
NOTE: If there is any music already present on the storage device the Turntable Briefcase will
automatically select the relevant playback mode and begin playback automatically. Press the M
button to scroll back to Turntable mode shown as -PHO on the LED Display Screen.
3. Prepare the Turntable Briefcase and vinyl record for playback by following steps 1 through 7 on
page 12 for vinyl record playback. Do not lower the stylus at this point.
IMPORTANT: When the recording begins it will create a new track and retain the music already
on the USB drive or Micro SD card. Ensure there is adequate storage room for the length of your
recording on the USB drive or Micro SD card.