15
AFTER SALES SUPPORT
AUS 1300 777 137 NZ 0800 824 556 EMAIL [email protected]
NOTE: The Tone Arm must be in the Tone Arm rest or the Turntable Briefcase will automatically
select the Turntable playback mode. Ensure that the Auto Stop Switch is in the ON Position.
IMPORTANT: Before playing music from the FM Radio, turn down the volume of the Turntable
Briefcase to avoid a possible loud output from the speakers. Wait until the music is playing, and then
turn up the volume.
2. Press the M button to scroll through the available playback options and select FM Radio playback
mode. The LED Display Screen will show the FM icon lit and the current frequency the Turntable
Briefcase is tuned to in MHz.
3. Fully uncoil the FM antenna found on the rear panel. Adjust the position of the antenna if required
to acquire a clear signal.
4. Press and hold the button for about two seconds for the Turntable Briefcase to automatically
search and store FM radio stations into the Pre-Sets memory. The Stations will be saved as P01,
P02, and so on until the scanning is complete and all available stations have been saved into the
memory.
5. To scroll through the saved Pre-Set stations use the or buttons to move forwards to backwards.
When you advance through the saved station the LED Display Screen will briefly show the selected Pre-
Set, then show the Frequency of the Pre-Set in MHz until another Pre-Sets is selected.
NOTE: If the FM radio mode will not appear while scrolling through the M options, please turn off
the Suitcase Turntable using the Power/Volume Dial and then turn it back on again. The FM Radio
mode should now appear in the M options.
Using the Headphone Output
The Turntable Briefcase features a 3.5mm headphone output. When headphones or external speakers
with a 3.5mm connection are attached to the Turntable Briefcase via the headphone output, all sound
will be diverted to the headphones or external speakers, and no sound will be played via the inbuilt
speakers. Ensure that the 3.5mm plug is removed from the Turntable Briefcase when required, to
ensure that sound is played via the unit's inbuilt speakers once again.
NOTE: There will be no output from the inbuilt speakers while there is any connection present in the
headphone output socket.
Instructions (cont.)
Содержание EA2147A
Страница 24: ......