J2D EA2147A, Инструкция по эксплуатации

Страница: 11 / 24

11
AFTER SALES SUPPORT
AUS 1300 777 137 NZ 0800 824 556 EMAIL service@unclebills.com.au
Handling Vinyl Records
NOTE: Only handle vinyl records with clean hands and hold them by the edge or the label. Do not
touch the record grooves.
• Keep your vinyl records in protective sleeves when not in use to avoid dust and scratches.
• Store vinyl records upright. Records stored horizontally may bend and warp.
• Avoid placing vinyl records in direct sunlight, close to any heat source (radiator, stoves etc.) or
in a location that may be subject to vibration, excessive dust, heat, cold or moisture.
• To clean a vinyl record, gently wipe the surface in a circular motion using a soft anti-static cloth.
Playing Vinyl Records
To play a vinyl record, follow the steps below.
1. Turn the Power/Volume Dial clockwise until you hear a ‘click’ sound. The LED Display Screen
will show the welcome message HI briefly, then show -PHO indicating that the Turntable mode is
active. This is the default setting for the Turntable Briefcase.
IMPORTANT: Before playing a vinyl record, turn down the volume of the Turntable Briefcase to
avoid possible loud crackling noises. The crackling noises made by the stylus coming into contact
with the vinyl record could damage the unit. Wait until the stylus is completely placed on the vinyl
record, and then turn up the volume.
2. Set the Auto Stop Switch to the ON position. The unit will now be set to automatically stop after
the completion of play of the vinyl record. If the Auto Stop Switch is set to the OFF position, the
unit will not stop automatically when the vinyl record is completed and the Turntable Platter will
constantly spin.
NOTE: While the Turntable Platter is spinning no other playback mode can be activated.
3. Choose the desired playing speed using the Speed Selection Switch (No. 7 on the Turntable parts
list). Select between 33, 45 and 78 RPM.
NOTE: When playing a 45 RPM record, use the included 45 RPM adaptor on the record spindle.
4. Carefully place the vinyl record on the Turntable Platter.
5. Unlock the Tone Arm Lock by moving it up and away from the Tone Arm itself.
6. Raise the Tone Arm using the Cue Lever, or carefully with your hand.
7. Place the Tone Arm vertically over the first track or over the outer edge of the vinyl record. The
Turntable Platter will start spinning if the Auto Start Stop switch is set to the ON position.
Instructions