J2D EA2147A, Инструкция по эксплуатации

Страница: 14 / 24

14
AFTER SALES SUPPORT
AUS 1300 777 137 NZ 0800 824 556 EMAIL service@unclebills.com.au
Instructions (cont.)
3. Switch on the Bluetooth
®
functionality on your device and scan for available connections. The
Turntable Briefcase will be shown in the available connections as J2DTURN.
4. Select J2DTURN from the list. Depending on your device you may be prompted to enter a pass
code. If requested enter the code ‘0000’.
5. When the letters bt stop flashing on the LED Display Screen, your device has now been paired and
you can being using your connected device.
NOTE: If no device is paired the bt message shown on the LED Display Screen will constantly flash.
When a previously paired device is found it will automatically connect to the Turntable Briefcase.
NOTE: The volume can be controlled on both the connected media device and the Turntable
Briefcase itself.
NOTE: Use playback controls on your connected device to navigate through your music selections.
Using your previously paired Bluetooth® enabled device.
1. Turn the Power/Volume Dial clockwise until you hear a ‘click’ sound. The LED Display Screen
will show the welcome message HI briefly, then show -PHO indicating that the Turntable mode is
active. This is the default setting for the Turntable Briefcase.
NOTE: The Tone Arm must be in the Tone Arm rest or the Turntable Briefcase will automatically
select the Turntable playback mode. Ensure that the Auto Stop Switch is in the ON Position.
2. Press the M button to scroll through the available playback modes and select Bluetooth
®
playback
mode. The LED Display Screen will show bt.
3. Allow a few seconds for the Turntable Briefcase to automatically connect to your previously paired
Bluetooth ® device.
4. Once the connection is made the bt message will stop flashing on the LED Display Screen and you
can begin using your connected device.
Using the FM Radio
1. Turn the Power/Volume Dial clockwise until you hear a ‘click’ sound. The LED Display Screen
will show the welcome message HI briefly, then show -PHO indicating that the Turntable mode is
active. This is the default setting for the Turntable Briefcase.