J.P. SELECTA TEMPLOW YC, Руководство по эксплуатации

Страница: 37 / 44

L01
Upper alarm sensor low
temperature alarm (Temp ≤ MIN of
setting warning temperature, rarely
happen)
1.Check the settings of warning temperature are correct for you. If
not, change the settings using buttons of display panel.
2.Check the sensor is good and its connection is correct. If sensor
defective, replace sensor.
3.Try a known good main board. If the issue does not persist,
replace main board. (rarely)
H02
Lower alarm sensor high
temperature alarm (Temp ≥ MAX of
setting warning temperature,
usually happen when you just
power on the unit, because at that
time the cabinet temp has not
dropped to your setting temp)
1.Check the settings of warning temperature are correct for you. If
not, change the settings using buttons of display panel.
2.Check the sensor is good and its connection is correct. If sensor
defective, replace sensor.
3.Try a known good main board. If the issue does not persist,
replace main board. (rarely)
4.Refrigerating system failure, please see refrigerating system
failure part.
L02
Lower alarm sensor low
temperature alarm (Temp ≤ MIN of
setting warning temperature, rarely
happen)
1.Check the settings of warning temperature are correct for you. If
not, change the settings using buttons of display panel.
2.Check the sensor is good and its connection is correct. If sensor
defective, replace sensor.
3.Try a known good main board. If the issue does not persist,
replace main board. (rarely)
H03 Ambient temperature high alarm
Keep the unit at least 30CM far away from other objects, and open
your air ‐ conditioner to cool it.
H04
Upper condenser temperature high
alarm
1.Keep the unit at least 30CM far away from other objects, and
open your air ‐ conditioner to cool it.
2.Check condenser ‐ fan good or not. If not, replace it.
H05
Lower condenser temperature high
alarm
1.Keep the unit at least 30CM far away from other objects, and
open your air ‐ conditioner to cool it.
2.Check condenser ‐ fan good or not. If not, replace it.
do
The door was not close longer than
1 min
Close the door.
PF Powerfail alarm
1.Check the power line connect well with the 220VAC power
source and freezer.
2. Make sure the 220VAC power is OK using multi ‐ meter.
Reconnect the power line to a known good power source.
3. Check if the fuse and power supply board are OK, replace the
damaged part of the two part.
bL
Low battery alarm
(battery volts
＜
12V)
Replace battery
Er Recorder not connected
1.Check the connection of recorder
2.Replace the recorder
Pr USB data error
1.Reconnect disk and check the connection of recorder
2.Replace the recorder
LoF Recorder not startup
1.Under the unlock status long press enter and up buttons till LoF
disappear .If it does not work, check the connection of recorder
2.Replace the recorder