J.P. SELECTA AUTESTER ST DRY PV-B print 18L, Руководство пользователя

Страница: 54 / 54

INSTRUCTION MANUAL CODE 80416 REV D 12/2023 Page: 54
J
.P. SELECTA s.a.u. Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
9. Transportation and storage
9.1 Preparation before Transportation and Storage
Shut off the power switch, unplug the cord, and make the sterilizer been cooled down completely.
9.2 Draining
Drain water from reservoir and the condensate collector completely: insert the joint end of the attached tube to drain
connection. (The spout on the left is the water spout used for the “used-water out”, the one on the right is used for the
“clean-water” drain spout).
Used-Water out Clean-Water out
9.3 Conditions For Transportation And Storage
Temperature: -5ºC ~ +55ºC
Relative Humidity: ≤85%
Atmospheric pressure: 500HPa~1060HPa
9.4 Package
Package is used in transportation for protecting product, conveniently delivery and sales. The sterilizer package require -
ment should as followed:
1) Product can not over 3/4 volume of package
2) Product should be fix inside the package
3) Package bag should be higher than product 6mm
10. Warranty
This product is guaranteed for one year. The warranty does not cover damages caused by improper use or by causes
beyond J.P. SELECTA, s.a.u.
Any manipulation of the equipment by personnel not authorized by J.P. SELECTA, s.a.u. automatically voids warranty
benefits.