J/Fit Mini Elliptical, Схема сборки

Страница: 14 / 18

This stage should last for a minimum of 12 minutes though most people start at about 15-20minutes
Series Monitor
SPECIFICATIONS :
TIME …………… ........................................................00:00-99:59 MIN
SPEED ………………………………… ..0.0-99.9 MPH
DISTANCE ………………………… . …… .0.00-999.9 MILES
CALORIES (CAL) …………… . ………………… ...0-9999KCAL
KEY FUNCTIONS:
MODE: This key lets you to select and lock on to a particular
Function you prefer.
OPERATION PROCEDURES:
1 . AUTO ON/OFF:
◆
The system turns on when any key is pressed or when it receives an signal input from the speed
◆
sensor.
◆
The system turns off automatically when the sensor has no signal input or no key are pressed for
approximately 4 minutes.
2. RESET:
The unit can be reset by pressing
the mode key for 3 seconds.
3. MODE:
To choose the SCAN or LOCK if you do not want the scan mode, press the MODE key when the pointer
on the function you want which begins blinking...
4. FUNCTIONS:
TIME: Press the MODE key until the pointer advance
to TIME. The total working time will be shown.
SPEED: Press the MODE key until the pointer advance to
SPEED. The total working time will be shown.