J.E. Adams 9500 Series, Руководство пользователя

Страница: 5 / 12

5
• Once unit has been installed use 5871B8 cap plugs supplied with unit to seal holes in
canister bottom located in lower cleanout door. Then connect to power, insert shampoo
and spot formula into bottom door and attach lids to appropriate bottles.
• Turn unit on and move to program instructions.
Programming Instructions:
Coin acceptor:
•
No programming to acceptor needed if unit was purchased with the standard Imomex
Z32 electronic acceptor (8149-92 our part number) is pre-programmed to accept US
quarters, .984 tokens, US $1 coin and 1.073 token. Acceptor is pre-programmed before it
is sent to J.E. Adams.
• If different acceptor was purchased, see additional literature sent along with unit for
programming info.
Bill acceptor:
•
Bill acceptor comes pre programmed from J.E. Adams and should not require any
changes. If additional programming is needed to acceptors please refer to additional
literature sent along with this unit.
Display:
• Unit may be programmed when received depending on information given at that the time
of order.
• To program follow the instructions below.
Display programming with remote:
1)
TO PROGRAM, POWER MUST BE TURNED ON.
2)
INSERT PLUG INTO BACK OF DISPLAY AND PRESS THE EDIT KEY ON REMOTE PAD.
3)
THE TIMER WILL DISPLAY “TOTAL COINS”. THIS IS THE AMOUNT OF COINS THAT
HAVE BEEN PUT THROUGH MACHINE SINCE THE LAST TIME IT WAS ZEROED OUT. TO
ZERO, PRESS DELETE KEY. TO SAVE, PRESS THE SAVE KEY. THE UNIT WILL NOW