J.E. Adams 9500 Series, Руководство пользователя

Страница: 4 / 12

4
Installation Instructions:
• Determine location to mount unit (“
DANGER
” “THIS EQUIPMENT
INCORPORATES PARTS SUCH AS SWITCHES, MOTORS, OR THE LIKE THAT
TEND TO PRODUCE ARCS OR SPARKS THAT CAN CAUSE AN EXPLOSION. WHEN
LOCATED IN GASOLINE-DISPENSING AND SERVICE STATIONS INSTALL AND
USE AT LEAST 20 FEET (6 M) HORIZONTALLY FROM THE EXTERIOR
ENCLOSURE OF ANY DISPENSING PUMP AND AT LEAST 18 INCHES (450 MM)
ABOVE A DRIVEWAY OR GROUND LEVEL.”
• Run 20amp wire service to location underneath canister. Run wire to top of units as
shown in fig. 3
• Grounding Instructions: This appliance must be connected to a grounded metal,
permanent wiring system; or an equipment-grounding conductor must be run with the
circuit conductors and connected to the equipment-grounding terminal or lead on the
appliance.
• Mount unit to location and use fig. 1 for mount pattern
• If unit is vault ready see fig. 2 for vault tube location.