background image

 

3

 

 
 

 
 
SPECIFICATIONS: 

 

Unit specifications: 

Voltage:                  110v, 60Hz 

Amperage:              (1)20 amp service is required for this unit 

Weight:                   195 lbs with pallet attached 

Vac specifications: 
Motors:                   (2) Ametek 110v motors 

Fuses:                     (2) 10 amp fuses, .75 amp and .50 amp 

Relays:                    (2) DPDT 30 amp rating per contact 

Shampoo specifications: 

Compressor:            (1) Thomas 110v, 1/12

th

 hp compressor 

Peristaltic pump:      (2) Anko peristaltic pumps, 120vac 
Relays:                   (2) Ice cube, DPDT 

NOTE: “UNIT INTENDED FOR COMMECIAL USE ONLY” 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

When using an electrical appliance, basic precautions should always be followed, including the 

following: 

 

READ ALL INSTRUCTIONS BEFORE USING (THIS 
APPLIANCE) 
 

WARNING – To reduce the risk of fire, electric shock, or 
injury: 

 

Do not use on wet surfaces. 

 

Use only as described in manual. Use only manufactures recommended attachments. 

 

Do not allow to be used as a toy. Close attention is necessary when used by or near children. 

 

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, 
lint, hair and anything that may reduce air flow. 

 

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving 
parts. 

 

Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas 
where they may be present. 

 

“Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot 
ashes.” 

 

“DO not use without dust bag and/or filters in place.” 

SAVE THESE INSTRUCTIONS

 

 

 

 

 

Содержание 9500 Series













Отзывы: