J/Boats J/109, Руководство пользователя

Страница: 14 / 66

J-109– Page 14/37
5.4. INSTALLATION OF NEW EQUIPMENT
Since January 1
st
1996, the equipment electric has been subject to the European
“Electromagnetic Compatibility” Directive (Ref. 89/336/EEC). Only new equipment
meeting this standard and bearing the CE mark must be installed. The equipment must also
be supplied with a certificate of conformity and an instructions manual.
Contact your concessionaire for installing the equipment or carefully follow the
installation instructions (cable cross-sections, protection).
To avoid maintenance problems, note any alterations to the electrical layout in the
manual.
IMPORTANT
When you install new electrical equipment, ensure that your battery can still handle the overall
consumption.
5.5. ELECTRIC WINDLASS (OPTION)
IMPORTANT
When you use the electric windlass, remember that it consumes a lot of electricity and read the
manufacturer’s instructions.
5.6. 230V AC (110V AC) CIRCUIT
The 220V or 110V system on board is protected by a circuit breaker and fitted with a
differential switch located aft the engine room. Any additional wiring for 220V or 110V
accessories on board must be performed by professional marine electricians and the main circuit
breaker recalibrated if necessary.
IMPORTANT
Do not alter the vessel’s electrical installations or the relevant layouts. Installation, modification and
maintenance should be performed by a qualified marine electrician.

Check the system at least every two years.
 Disconnect the vessel’s power connections when the system is not being used
 Connect the metal boxes and casings for the electrical appliances installed to the vessel’s protective
conductor (green or green/yellow wire).

Use double-insulated or earthed (grounded) electrical appliances