16
Installation
This appliance can operate either wall mounted or lay on table.
Drill two holes on the wall and have a distance of 1.8m from the ground. The diameter of the
hole should just contain the inflated plastic pipe. After tucking the inflated plastic pipe, fix
pothook on the pipe with screw. Make sure pothook is fastened and hang the heater. The clip
under the pothook should be inserted rabbet of the heater bottom.
Important: the bottom screw must be tightened very well in order to prevent the
appliance from falling down.
Operation
Insert the plug into a power outlet. The heater can perform the following functions:
- Turn the thermostat knob in a clockwise direction until it reaches the maximum setting.
