13
- Do not run the appliance in locations, when the heater will be left
unattended for long periods of time (For example, for several weeks in
an unoccupied summer cottage).
- Use the heater on flat, dry surfaces only.
- Do not use attachments or filters not recommended by the
manufacturer.
- Loose connections between the heater plug and the electrical outlet
may cause the plug to overheat. In the event of overheating, do not
use the appliance and contact an authorized BENRUBI Service
Center.
- Use the appliance on 220-240V AC, 50Hz power supply.
- Ensure that no other appliances are plugged into the same circuit as
your heater. A circuit overload could occur, resulting in dimmed lights,
blown fuses, tripped circuit breakers, or fire hazard.
- Route the cord so that it will not be walked on, or pinched by
furniture.
- This appliance is intended for normal household use only.
- Do not use the heater with a programmer, timer or any other device
that switches the heater on automatically.
- Do not wash the appliance with water and do not touch it with wet
hands.
- Do not cover the appliance with any clothing and do not place
alongside inflammable objects such as cushions, newspapers or
curtains.
- Use the appliance only for its intended use only.
- Always turn the power switch to OFF (0) position to switch off the
appliance before plugging or unplugging from the mains outlet.
- Do not allow the power cord to touch hot surfaces. Allow the
appliance to cool down completely before storage.
- Always disconnect the appliance from the electrical outlet when not in
use.
- Do not place the appliance on top or near any source of heat (hot
gas, or electric burner or heated oven) or on top or near surfaces
where it can get wet.
