IXOM GridBee GF10000 Скачать руководство пользователя страница 29

Страница: 29 / 36

Fluid Intake Assembly - Option 2 -

Fixed horizontal plate bolted to bottom of structural assembly.

Intake Type :

Fixed horizontal plate with 12-inch (31cm) openings.

Intake Depth Adjustment:

No adjustment necessary. Horizontal inflow from 25 in (64cm) below distribution dish.

Technology Description-

Floating, AC powered, circulation equipment for wastewater treatment and freshwater

applications. Continuous operation on single-phase AC power.

Figure 1:

GF10000

Electrical Requirements -

Requires single phase 120VAC /

60Hz / 15 Amp Service.

(Not supplied by Ixom.)

Patent Pending

Subject to change without notice.

Maintenance / Warranty

- Minimal maintenance. Limited 2-year parts and labor warranty.

Drive System

- High torque, direct drive (no gearbox), low

voltage brushless D.C. motor.

Minimum Water Depth

- Minimum of 30 inches (0.8m)

operating depth required with fixed horizontal plate. No

damage to machine or bottom of reservoir when run dry in

shallow water.

Fluid Intake Assembly - Option 1 -

Hose system bolted to bottom of structural assembly.

Hose System:

10 to 100 feet (3 to 30.5m) available in 36-inch (91cm) diameter x 10, 15 or 20 feet (3, 4, 5 or 6m)

sections.

Intake Type :

Horizontal plate with 12-inch (31cm) openings.

Intake Depth Adjustment:

15 feet (4.5cm) of field adjustment with three SS chains connected to hose coupling.

Wiring Controls -

Includes power box which converts 120VAC to low voltage DC power. Includes submersible, SOOW

type, cable with inhibitors for UV protection. SCADA accessory compatible.

Rotating Assembly -

Removable assembly with easy access to motor and power box. Impeller handles 4-inch (10cm)

spherical solids. Oil-filled (food grade) teflon freeze sleeve with o-rings, shaft. Rotational indicator on shaft.

Materials of Construction

- T316 stainless steel constructions.

Foam-filled high-density polyethylene (HDPE) floats.

Thermoplastic rubber intake hose. HDPE Strainer.

Flow Rates

Flow rates at full speed at 10 feet (3.0 meter) diameter

Direct Flow Rate: 3,000 gpm (12,000 lpm)

Induced Flow Rate: 7,000 gpm (26,000 lpm)

Combined flow Rate: 10,000 gpm (38,000 lpm)

Flotation System

- Three floats in triangular pattern each with

an adjustable float arm for proper vertical positioning, total float

buoyancy of 1,200 lbs (550kg).

Shipping Size / Weight
• Crate -

87in x 87in x 65in (2.2m x 2.2m x 1.7m) / 1500lbs (680kg)

Exact weight and dimensions varies dependent on

machine configuration.

Anchoring -

Tethered to shore with SS cable.

Ice Protection -

Freeze sleeve and positive pumping under distribution dish to maintain circulation.

Accesories Available -

(1) Chemical Injecion Kit (2) SCADA Accessories

Fluid Intake Assembly - Option 3 -

See GF10000DM Dual Mix Features Sheet.

Technical Data Sheet

GF10000

1525_10493_20200526

O&M_GF10000_10492_20201020 - 27

Содержание GridBee GF10000





































Результаты поиска

Содержание GridBee GF10000

Отзывы:

Бренды по названию

Популярные бренды

IXOM GridBee GF10000, Руководство пользователя

Результаты поиска

Содержание GridBee GF10000

Отзывы:

Бренды по названию

Популярные бренды