Chain Bracket Assembly
TOOLS REQUIRED:
(2) 13mm wrench
13mm socket wrench (optional)
STEP 1:
Locate the 3 chain brackets and the M8
X 45mm long bolts and M8 nylok nuts
(3 sets needed).
STEP 2:
Notice that along the perimeter of the
dish on the core unit assembly, there are three
locations where square tubing extends above the
dish. Each of the 3 chain brackets will be attached
to each of the three square tubing just above the
dish.
STEP 3:
Place one of the chain brackets over the
square tubing with the wider side facing up and the
opening facing outward.
STEP 4:
Once the chain bracket is slid around the
square tubing, insert the M8 x 45mm bolt through
the outer holes in the chain bracket. Apply anti-
seize to the threads of the bolt. Tighten the M8
nylok nut on the bolt to keep the chain bracket in
place using two 13mm wrenches.
STEP 5:
Repeat steps 3 and 4 for the other 2
chain brackets.
Applying Anti-Seize
To The Bolts
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Equipment Assembly
10155_20200529
O&M_GF10000_10492_20201020 - 17
