iXBlue OCEANO RT2500S Series, Руководство пользователя

Страница: 36 / 66

OCEANO RT2500S/RT5000S Series – User Guide
VI.5.3 P
ARAMETERS
S
ETTINGS
M
ENU
VI.5.3.1 Transponder Transmission
The following commands are transmitted through a serial link or an acoustic channel:
•
Transponder / Responder blanking time and turn-around time (no inhibition through
the acoustic command nor in responder mode).
•
IRF transmission frequency
•
CRF pulse programming
•
CAF pulse programming
Figure 16 – Transponder transmit window
The list of frequencies contained in the IRF window consists of 32 tonal frequencies
issued from the
.prb
file.
For the CRF pulse and CAF pulse areas, the following texts:
Combination N˚
,
Frequency (kHz) or Code N° as well as the related windows are dynamically updated
depending on the selected pulse type. These windows contain:
•
In the case of M-FSK: 24 reply codes comprised between 0 and 23
•
In the case of tonal pulses: 32 tonal frequencies issued from the
.prb
file
The frequencies selected in the IRF and CRF pulse areas (in the case where this pulse is
of the tonal type) must be different. The inter-comparison tests between these frequencies
are performed when the OK , Send , Prev Transp. and Next Transp. buttons are pressed.
In responder mode, the Send button of the Transponder / Responder area is inhibited.
Commands
Dialogue box
Additional
information
MU–RT8x1–AN–001 Ed. M – September 2013 26