iXBlue ModBox VNA, Руководство пользователя

Страница: 22 / 36

ModBox VNA – User’s Manual
Ref. Ed. B – 12/05/2020 20
4
Embedded User Interface Operation
We consider here that the user has installed the hardware items related to the
ModBox system. We also consider that the user is familiar with ModBox
configurations and that the ModBox configuration is presently set.
4.1 Operation procedure
Step Action
1. Turn on the ModBox general mains switch <10>.
2. The ModBox system will initialize and check critical components operation.
The following screen will be displayed after the ModBox interface has
controlled the hardware conditions and settings:
Figure 5: Main Tab
First, we need to start a laser:
To do that you have to switch the laser key (<2>, front panel) to the
EN position,
then turn on one of the lasers using the corresponding ON/OFF button.