iXBlue ModBox VNA, Руководство пользователя

Страница: 17 / 36

ModBox VNA – User’s Manual
Ref. Ed. B – 12/05/2020 15
2.4 General Recommendations
Make sure that the optical patch cords connected to the Mod out and Ctrl optical
ports are cleaned. Failure to do so may induce optical losses and possible
damage to the optical fiber end tips.
Make sure there is enough clearance below and behind the unit to ensure proper
excessive heat removal by ventilation.
The ModBox is intended to operate from a power source that does not apply
more than 265 V RMS between the supply conductors or between any supply
conductor and the ground.
The ModBox chassis is connected to earth via the power supply cable. A
protective ground connection by way of the grounding conductor in the power
cord is essential for safe operation. A dedicated ground plug is available on the
rear panel. In order to avoid potential injuries, insert the power cable only into a
socket outlet provided with a protective earth contact. Before switching on the
instrument, check that the electrical installation complies with the local safety
requirements.
Only use specified power cord and connector for your product. This power cord
should always remain in good condition.
To avoid personal injuries, do not operate this instrument without the
protective cover of the chassis. Do not make any attempt to service or maintain
the ModBox system.
Should you need any help, contact iXblue staff to get customer service support.
The ModBox is designed for indoor use. To avoid personal injuries do not expose
the instrument to water or excessive moisture. Do not operate the instrument
in the presence of inflammable gases or fumes.