ModBox VNA
–
User’s Manual
Ref. Ed. B
–
12/05/2020
18
3
Configuring the ModBox
3.1
Software installation
Users can operate the ModBox system using the touchscreen interface on the
front panel. Once the system is started, the ModBox interface application is
launched and the system is now ready for operation.
A remote control Graphical User Interface (GUI) can be found on the USB flash
drive delivered with the ModBox. The executable file is called
RemoteVNA.exe
.
This software requires the .NET Framework to be installed. If your system is
running
Windows 10
, you do
not
need to do anything before
double clicking
the file
.
If you are running a previous version of Windows, you may need to install the
.NET Framework, but chances are that it may already be installed on your system.
If it is not installed yet,
or
if you do not know if it is, run the setup called
dotNet
Framework Setup (v4.8).exe
(this requires administrator privileges).
If the Framework was already installed, you will encounter the following kind of
error message:
If that is the case, close the error window and run the remote control software.
You are free to copy and place the
RemoteVNA.exe
file wherever you want. There
is no additional setup procedure and you can run the software on any Windows
machine as long as the .NET Framework is installed.
To remotely connect to the ModBox using the
RemoteVNA
software, you will
require the ModBox’s IP address and enter it in the text box at the top of the
window:
Содержание ModBox VNA
Страница 1: ...ModBox VNA User s Manual...
Страница 2: ......
