IWT Eventa L Tandem, Руководство пользователя

Страница: 37 / 71

3.4.2.4 Periodic Inspection
Preferably not less than once every three years and annually if the trailer is used frequently, the
trailer electrical installation and supply cable should be inspected and tested and a report on their
condition obtained as prescribed in BS 7671 Requirements for Electrical Installations published by
the Institution of Engineering and Technology and BSI.
3.4.2.5 Generators
Generators must have a stabilized voltage output device, 16 amp max output. 230v +/-10%
Connecting
1. Before connecting the generator to the trailer, check that the trailer is not electrically
connected to a towing vehicle.
Also, prior to use, examine the supply flexible cable to ensure there is no visible damage or
deterioration.
2. Switch off all appliances, the miniature circuit breakers (M.C.B) and the residual current
device (R.C.D)
3. Start the generator and allow it to run for a few minutes to stabilise.
4. Connect the trailer to the generator via the input socket.
5. Switch on the 16 amp miniature circuit breaker (M.C.B)
6. Switch on the residual current device (R.C.D)
7. Before switching anything on, first switch on the fridge in 230v mode or plug in a 230v light
into one of the 230v 13 amp sockets. This is to provide a load on the generator and help
reduce any voltage spikes in the supply which may damage the charger.
8. Switch on any other appliances you require.
It is always advisable to have at least one other mains appliance switched on with the charger unit to
minimise the chance for the generator to damage it.
To Disconnect
1. Before turning off the generator first switch off the appliances.
2. Switch off at the trailer main isolating switch on the mains distribution box.
3. Switch off the generator.
4. Unplug the cable first at the generator and then from the trailer inlet socket.
5. Replace any socket covers.
If your generator has a 12v supply, do not connect the 12v supply to the trailer or the auxiliary
battery.