IWT Eventa L Tandem, Руководство пользователя

Страница: 30 / 71

Menus
Home
The home screen is displayed by default. The control panel will return to the home screen when left
idle. The home screen displays the time as well as any relevant notifications or warnings that are
present.
Setting the time:
1. On the home screen, hold for 3 seconds until the hours begin to flash.
2. Keep pressing or to change hours.
3. Press to set hours, minutes will now flash.
4. Keep pressing or to change minutes.
5. Press to finish.
Internal Temperature
The inside temperature, as detected by a sensor inside the control panel, is displayed on this
screen.
You can change between degrees Celsius and degrees Fahrenheit by pressing and selecting for
°C or for °F.
Leisure & Vehicle Battery Voltage
This screen shows the voltage of the currently selected battery as set on the “Select
Battery” screen. If a 230V mains supply is connected then the charging voltage of the
Leisure battery will be displayed.
An estimate of your batteries’ remaining charge can be seen by pressing then . 12V or less reads
0%, and 12.7V or more reads 100%. You can return to displaying the voltage by pressing then .
To increase accuracy of the battery voltage reading, switch the “Master Switch” off.
Note: See “Notifications and Warnings” section for low voltage warnings and the “User Settings” section the
Low Volts alarm enable.