IWILL BD100 Plus, Руководство пользователя

Страница: 55 / 64

55
300 (100x3) (*) / 350 (100x3.5) / 400 (100x4) / 450 (100x4.5) / 500 (100x5) / 550
(100x 5.5) / 600 (100x6) / 650 (100x6.5) / 700 (100x7) / 750 (100x7.5) / 800 (100x8)
/ Manual
f. After selecting CPU speed, press Save & Exit CMOS Setup to complete. The system will
automatically re-boot.
Should your CPU fail to over-clock, the screen will become blank and the system will hang
(temporarily suspend or “freeze”) while the system attempts to re-boot. If this happens, follow the
procedure below:
a. Press the power button on the front panel to power off the system.
b. Hold the INSERT key down, then press the power button on the case. The system will re-
start using 66 MHz as the CPU external frequency.
c. Press < Del> key during boot sequence to enter “ CMOS Setup Utility ” and repeat steps “c”
through “f” (See above).
5.4 View Detailed Manual
This Power Installer CD includes detailed information of all Iwill manuals for every motherboard
manufactured by Iwill. Please insert the Iwill Power Installer CD into the CD-ROM drive; the Auto
Run program will display the main manual automatically. Click the “View Manual” item, and select
the product you want to view, and the manual will be displayed.
5.5 Installing Operating Systems
This section briefly demonstrates how to install a few popular software operating systems. Use this
section only as a guide. It is highly recommended that users first refer to the installation manual of
their operating system for a more thorough, detailed description on how to install software.
5.5.1 Windows 98
Whenever installing Windows 98, please remember that Setup creates a new folder for Windows 98,
and won’t transfer any existing system settings. Windows 98 will become your default operating
system, and will use standard system settings. This procedure represents an entirely new installation
of Windows, therefore you'll need to reinstall any existing programs you may want to use.
There are two ways to install Windows 98. Each method depends on your current computer setup.
Note: During Setup, your computer will automatically restart several times using the Windows 98
Setup wizard.
5.5.1.1 Installing the CD-ROM version of Windows 98
1. Place a Windows 98 Startup Disk into the floppy disk drive.
2. Restart your computer.
The Microsoft Windows 98 Startup menu will appear.
3. Place the Windows 98 CD into your CD-ROM drive.
4. Type the number 1 and press <ENTER >.
A series of scans is performed, and then the MS-DOS prompt is displayed.
5. Type the word setup at the MS-DOS display, and press <ENTER>.