18
Step 12. Connect the Power-ON button
All ATX computers provide a Power-On button on the front panel of your PC case. Simply plug in
the ATX power connector into the Power-On button.
Step 13. Install the Power Supply cord
The BD100 Plus motherboard provides a 20-pin ATX power connector. This works in conjunction
with the Power-On button to provide remote On/Off function.
Step 14. Install the Keyboard
Connect the cable from the PS/2 keyboard connector at the back panel to the keyboard.
Step 15. Install the Display Card
Insert the display card into the ISA, PCI or AGP expansion slot.
Step 16. Connect the External Peripherals
The external peripherals are devices located outside the computer chassis, such as the serial mouse,
printer, PS/2 mouse, external modem, etc. Connect these devices to their appropriate connectors.
Step 17. Power-on the system
Once the system is powered on, make sure you enter the BIOS setup program and load the
manufacturer’s default settings. After the system reboot, you are ready to install your operating
system. Enjoy!
Содержание BD100 Plus
Страница 14: ...14...