IWILL BD100 Plus, Руководство пользователя

Страница: 45 / 64

45
4.7 PNP/ PCI CONFIGURATION
This setup page specifies Plug and Play and PCI features.
4.7.1 PNP OS Installed
The field specifies whether a Plug and Play operating system is installed.
Options Yes
No (*)
4.7.2 Resources Controlled By
The BIOS has the capability to assign system resources to all Plug and Play devices. However, this
capability means absolutely nothing unless you are using a Plug and Play operating system such as
Windows

95/98/NT.
Options Description
Auto Resources controlled by BIOS automatically
Manual (*) Resources controlled by the user
4.7.3 Reset Configuration Data
Sometimes when you install a new add-on, the system reconfiguration causes such a serious conflict
that the operating system cannot boot. Only in this case, exit Setup and select enabled. The Extended
System Configuration Data (ESCD) will clear every time the system boots.
Note: Leave this field disabled unless you have a conflict similar to the one mentioned above.
Options Enabled
Disabled (*)
3.7.4 IRQ 3 / 4 / 5 / 7 / 9 / 10 / 11 / 12 / 14 / 15 assigned to
DMA 0 / 1 / 3 / 5 / 6 / 7 assigned to
If the Resources Controlled By field is set to Manual , use these fields to assign resources
Options Description
Legacy ISA Resources will not be assigned to any PnP device
PCI/ISA PnP Resources are available to PnP devices
4.7.5 Used MEM Base Addr
Some add-in cards ask for a specific address space in the system memory. This field specifies the
memory base (start address) of the reserved memory space.
Options N/A (*) / C800 / CC00 / D000 / D400 / D800 / DC00