IWILL BD100 Plus, Руководство пользователя

Страница: 24 / 64

24
Locate the FAN2/3 header on the motherboard:
Pin 1 Ground
Pin 2 +12 V
Pin 3 SENSE
3.3.13 Power-On header (PWR ON)
The Power-On header can be connected to the Power-On button located on front panel of your PC
case. Pressing this button turns your system on or off. At least two seconds must pass before the
power supply will recognize another on/off signal.
Note: Press the Power-On button, holding it in for four seconds. This will forcibly execute the
shutdown procedure immediately.
3.3.14 Front panel connector (J43)
The J43 connector contains several headers, which are connected to buttons or switches located on
front panel of your PC case.
Note: These functions are optional for the user.
3.3.14.1 IDE LED header (ALED)
If connected, the LED will light up whenever the IDE devices are working. The 2-pin IDE
LED header is located on pins 5--6 (identified as ALED). To use this function, connect the
cable from the ALED header to the LED on the front panel of your PC case.
Locate the ALED header on the motherboard:
Pin 5 Anode (+)
Pin 6 Cathode (-)
3.3.14.2 RESET header (RST)
If connected, you may use the button on the front panel to reset the system. The 2-pin reset
header is located on pins 9--10 (identified as RST). To use this function, connect the cable
from the RST header to the reset button located on front panel of your PC case.
Locate the RST header on the motherboard:
Pin 9 RESET
Pin 10 Ground
3.3.14.3 Power LED header (PLED)
If connected, the LED will light up each time you power-on the PC. The 3-pin power LED
header is located on pins 11--13 (identified as PLED). To use this function, connect the cable
from the PLED to the LED located on front panel of your PC case.
Locate the PLED header on the motherboard:
Pin 11 Anode (+)
Pin 12 NC
Pin 13 Cathode (-)
S
11
1
1
2
11
1
1
2
1
11
1
2