1. Positive output cable
2. Remote control plug
3. Cutting gun connector
4. Power switch
5. Power cable
6. Manometer and oil-water separator
7. Fan
1.
Trigger mode key
Press the key to select 2T or 4T trigger mode.
2.
Cutting current knob
counterclockwise rotation reduces the current and
clockwise rotation increases the current.
3.
Air check key
Press the key, if the machine is not connected to
the gas line or the air pressure is low, the screen will
display “Undervoltage”.
4.
Screen
It displays cutting current, trigger mode and error
codes.
3.2.
Control panel of cutting machine
EN-7
