iWave Hardware User Guide Скачать руководство пользователя страница 30

Страница: 30 / 80

REL1.0

Page 30 of 80

Zynq Ult MPSoC SOM Hardware User Guide

iWave Systems Technologies Pvt. Ltd.

2.7.1

PS Interfaces

The interfaces which are supported in Board to Board Connector1 from Zynq Ult

MPSoC’s PS is explained in

the following section.

2.7.1.1

PS-GTR Transceivers

The Zynq Ult MPSoC supports four Multi-Gigabit PS-GTR transceivers with data rate from 1.25Gbps to

6.0Gbps. This PS-GTR transceiver lanes provide I/O path for MPSoC MAC controllers and their link partner outside. At

any given time, these four lanes can be used for any of below mentioned peripheral standards.

•

x1, x2, or x4 lane of PCIe at Gen1 (2.5Gb/s) or Gen2 (5.0Gb/s) rates

•

1 or 2 lanes of DisplayPort (TX only) at 1.62Gb/s, 2.7Gb/s, or 5.4Gb/s

•

1 or 2 SATA channels at 1.5Gb/s, 3.0Gb/s, or 6.0Gb/s

•

1 or 2 USB3.0 channels at 5.0Gb/s

•

1-4 Ethernet SGMII channels at 1.25Gb/s

The available peripheral standard option for each PS-GTR transceiver lane in Zynq Ult MPSoC is shown

below. This is user programmable via the high-speed I/O multiplexer (HS-MIO) of MPSoC.

PS Peripheral

Interface

Lane0

Lane1

Lane2

Lane3

PCIe (x1, x2 or x4)

PCIe0

PCIe1

PCIe2

PCIe3

SATA (1 or 2 channels)

SATA0

SATA1

SATA0

SATA1

DisplayPort (TX only)

DP1

DP0

DP1

DP0

USB0

USB1

SGMII0

SGMII1

SGMII2

SGMII3

The Zynq Ult MPSoC SOM supports two PS GTR transceivers (Lane0 & Lane1) on Board to Board Connector1

and another two PS GTR transceivers (Lane2 & Lane3) on Board to Board Connector2. Each PS GTR transceiver lane

supports one dedicated reference clock input pair with the ability to share reference clocks between lanes.

In Zynq Ult MPSoC SOM, the end user is responsible for sourcing the reference clocks to the PS-GTR lanes

through Board to Board Connectors. This gives full flexibility to end user to select the required peripheral standards

on PS-GTR lanes.

Содержание Hardware User Guide

















































































Результаты поиска

Содержание Hardware User Guide

Отзывы:

Бренды по названию

Популярные бренды

iWave Hardware User Guide, Руководство пользователя по оборудованию

Результаты поиска

Содержание Hardware User Guide

Отзывы:

Бренды по названию

Популярные бренды