iWave Hardware User Guide Скачать руководство пользователя страница 21

Страница: 21 / 80

REL1.0

Page 21 of 80

Zynq Ult MPSoC SOM Hardware User Guide

iWave Systems Technologies Pvt. Ltd.

2.5

Memory

2.5.1

DDR4 SDRAM with ECC for PS

The Zynq Ult MPSoC SOM supports 64bit, 4GB DDR4 RAM memory for

MPSoC’s

PS. Four 16 bit, 1GB DDR4

SDRAM ICs are used to support a total on board RAM memory of 4GB. Also, Zynq Ult MPSoC SOM supports

8bit ECC for RAM memory. These DDR4 devices operates at 1.2 voltage level. DDR4 memory is connected to the hard

memory controller of the MPSoC PS. The RAM size can be expandable up to maximum of 32GB based on the

availability of higher density 16bit DDR4 device.

Note: Refer

ORDERING INFORMATION

section for exact RAM size used on the SOM based on the Product Part

Number.

2.5.2

DDR4 SDRAM for PL

The Zynq Ult MPSoC SOM supports 16bit, 1GB DDR4 RAM memory for

MPSoC’s

PL. One 16 bit, 1GB DDR4

SDRAM IC is used to support RAM memory of 1GB for PL. This device operates at 1.2 voltage level. In Zynq

Ult MPSoC SOM, Bank65 is used for PL DDR4 interface. The RAM size can be expandable up to maximum of

4GB based on the availability of higher density 16bit DDR4 device.

The Zynq Ult MPSoC SOM supports 300MHz LVDS Oscillator on board for PL DDR4 reference clock and

connected to Bank65 AG8 & AH8 dedicated clock input pins through AC Coupling capacitors.

Note: Refer

ORDERING INFORMATION

section for exact RAM size used on the SOM based on the Product Part

Number.

2.5.3

eMMC Flash

The Zynq Ult MPSoC SOM supports 8GB eMMC Flash memory for Boot & Storage of Zynq Ult MPSoC

PS. This eMMC Flash memory is directly connected to the SD0 controller of the

MPSOC’s

PS through MIO pins and

operates at 1.8V Voltage level. This SD/SDIO controller supports eMMC4.51 standard with up to 8bit HS200 mode.

The eMMC Flash size can be expandable up to maximum of 128GB based on the availability of higher density eMMC

Flash device.

Note: Refer

ORDERING INFORMATION

section for exact eMMC Flash size used on the SOM based on the Product Part

Number.

Содержание Hardware User Guide

















































































Результаты поиска

Содержание Hardware User Guide

Отзывы:

Бренды по названию

Популярные бренды

iWave Hardware User Guide, Руководство пользователя по оборудованию

Результаты поиска

Содержание Hardware User Guide

Отзывы:

Бренды по названию

Популярные бренды