Iwatsu SY-8218, Инструкция по эксплуатации

Страница: 49 / 77

B-H ANALYZER SY-8218 / SY-8219
37
■
6.7 Cursor measurement
■
6.7.1 Cursor setting
① Press to display the cursor menu shown in Fig.6-6.
② Move the edition cursor to an item to be set and press to determine the setting. Fig.6-6 Cursor menu
The cursor being set is displayed.

If is not pressed for approx. 3 seconds , the item on the edition cursor is set automatically.
➂
Items to be measured by each cursor are shown in Table 6-4.
Table 6-4 Cursor types and measurement items

6-5 : Even if Cross or Grad cursor is set for the time axis graph, the cursor is changed to the vertical cursor and the same items can be
measured.
Cursor Display graph Measurement items
Cross
B-H B (magnetic flux density), H (magnetic field strength)

6-5 Time axis B, H, V (induced voltage), I (exciting current)
Grad (grade)
B-H

(permeability)

6-5
Time axis
B, H, V, I
Off Cursor not displayed