Flash
Flash allows you to receive a dial tone on the same
outside line that you are using without having to
hang up. Flash may also be used to receive an
intercom dial tone to place another intercom call.
After you complete a call or if you make a dial-
ing mistake:
•
Press [
FLASH
].
•
Dial the new number.
To Use Centrex or PBX features:
•
Press [
S FLASH
]:
•
Dial the new number or feature code.
If your phone does not have [FLASH] or
[S FLASH] buttons:
•
Press
FEAT
then dial
+
for Flash.
•
Press
FEAT
then dial
+
for Short Flash.
Advanced Forward Features
This feature requires that a [
FWD
] key be pro-
grammed on your key pattern. The [
FWD
] key will
appear on one of the 18 or 12 multipurpose keys.
Set Active/Inactive
•
Press [
FWD
] if programmed at your station.
•
Enter the Call Type you wish to make Active/
Inactive:
1 = All calls (CO/Intercom).
2 = CO calls only.
3 = Intercom calls only.
Follow-Me Forward
Set Follow Me Destination
•
Lift the receiver (handset).
•
Press [
FWD
] + [
FWD
].
•
Enter the Call Type you wish to forward:
1 = All calls (CO/Intercom).
2 = CO calls only.
3 = Intercom calls only.
•
Enter the extension number of the originating
forwarding station.
Follow Me Cancel
•
Lift the receiver (handset).
•
Press [
FWD
].
•
Press
.
•
Enter the Call Type number you wish to cancel:
1 = Cancel Forwarding of All calls (CO/
Intercom).
2 = Cancel Forwarding of CO calls only.
3 = Cancel Forwarding of Intercom calls only.
Hold/Quick Forward Operation
•
If your phone is equipped with this feature,
pressing
HOLD/DND
will automatically forward
all incoming calls to your fixed call forward desti-
nation.
13
10
Answering Machine Emulation (Voice Mail
Monitor)
Station users may monitor voice mail messages as
they are recorded. During recording monitor, the
station user may select to initiate a conversation
with the caller. You may activate or deactivate this
feature from your extension.
To begin Voice Mail Monitor
When a call is answered by voice mail at an idle
station, you will hear a monitor tone.
•
The [
Voice Mail Monitor
] key red LED will begin
to flash.
•
Press the [
Voice Mail Monitor
] key.
•
When the [
Voice Mail Monitor
] key green LED
lights, you will hear the caller’s message as it is
recorded.
•
Press the [
Voice Mail Monitor
] key a second
time to begin talking to the caller.
or
•
Press
Speaker
or hang up to end voice mail
monitoring. The caller’s message will be saved
to your voice mailbox.
To activate / deactivate or change the Voice Mail
Monitor mode:
•
While your station is idle, press
Speaker
.
•
Press
FEAT
.
•
Press the [
Voice Mail Monitor
] key.
•
Press
to deactivate Voice Mail Monitoring.
•
Press
to activate manual Voice Mail Monitor-
ing.
•
Press
to activate auto Voice Mail Monitoring.
Busy ICM Callback
When you call another extension and get a busy
signal, do not hang up.
•
Press the
FEAT
button and dial
+
.
or
•
Press the [
ICM CALLBACK
] button (if as-
signed).
•
Hang up after you hear a confirmation tone.
When the busy extension becomes available, the
system will call you back.
•
Lift the receiver and you are automatically con-
nected to the extension.
Busy Number Callback
When an outside number you have called is busy,
you may tell the system to remind you to try again.
•
Do not hang up.
•
Press the
FEAT
button and dial
+
.
or
•
Press the [
TRUNK CALLBACK
] button (if as-
signed).
•
Dial the desired time you want to be called back.
•
Hang up after you hear a confirmation tone.
After the set time, the system will call you back to
try again.
•
Lift receiver to automatically dial the number.
