Iwatsu DS-8814 Скачать руководство пользователя страница 58

Страница: 58 / 141

Save/Recall menu (continuation)

Auto save

Format

setting

Default

Delete

Waveform data format (Style)

Binary coded waveform data (CH1/CH2/CH3/CH4) is saved with
the panel settings, time and comment.

In Binary format, the data is saved as binary data. The saved data is
recalled by the scope.

ASCII waveform data (CH1/CH2/CH3/CH4) is saved in CSV format
with limited panel settings and time. (CSV: Comma Separated Value)

ASCII data can be displayed using Windows applications such as
Excel (not provided with the scope).

Formats a medium inserted to a specified device. Note that formatting
the medium will erase all data saved in the medium. Using a medium
such as floppy disk or ATA card requires formatting.

Formatting the floppy disk

The format operation erases all stored data.

1. Set Format to Floppy with [Function operation].

2. Press the FUNCTION knob. The message “Push the FK to format

Floppy” appears.

Press the knob again to execute formatting.

Saves waveform data to the specified device sequentially when a new
waveform is captured.

Press ON to start Auto save.

Press STOP to stop Auto save.

Press RUN to restart Auto save.

When the Auto save function is active, all operations except RUN/
STOP are ignored.

During Auto execution, the data is saved as binary data.

Resets the settings to the factory settings. (See page 10.)

Deletes the specified file.

Binary coded

waveform

data

ASCII

waveform

data

Содержание DS-8814














































































































































Результаты поиска

Содержание DS-8814

Отзывы:

Похожие инструкции для DS-8814

Бренды по названию

Популярные бренды

Iwatsu DS-8814, Руководство по эксплуатации

Результаты поиска

Содержание DS-8814

Отзывы:

Похожие инструкции для DS-8814

Бренды по названию

Популярные бренды