IVT D40, Руководство по установке, пусконаладке и обслуживанию

Страница: 15 / 66

15
You have pressed “Menu” and are on row 1. Press “Se-
lect” and turn the dial and the display will scroll. You can
then choose to enter the display you require. Each display
has a number.
With a room sensor installed you can set the value here how
much you want it to affect the outdoor sensor. A high value
gives more effect from the room sensor.
Please note the
room sensor only
fine tunes
the heat curve. It is there-
fore important that you set the basic settings for the
heat curve and fine tuning from the start.
If a room sensor is installed you can utilise the holiday mode
function, you can set the number of days that the room
temperature is lowered to 15°C here. The temperature is
not adjustable and it does not affect the hot water. Normal
operation is resumed when the period is over.
If a room sensor and remote control is installed you can set
the required room temperature here. You can then use the
telephone to increase the temperature to normal.
This equipment is available as an accessory.
At this set temperature the heat pump only produces hot
water.
Line 1
With extra
sensor and
in ope-
rating
mode A
only
With extra
sensor
only
With extra
sensor,
remote
control
and in
operating
mode A
only
Operating
mode A
and B only
Operating
mode A
only
Using the dial you have moved to the hot water settings in
row 2.
Setting intervals for the continual raising of the hot water
temperature. If you choose for example 7 days, the tem-
perature is raised using the electric water heater once a
week to around 65°C (Operating mode A with electric
water heater only).
Line 2
Hot water setting
Interval for
hot water peak 2.2
Return Select
Main menu
Adjusting the hot
water settings 2
Return Select
Temperature settings
Setting of summer
disconnection 1.14
Return Select
Temperature settings
Remote control
temperature 1.13
Return Select
Temperature settings
Setting of holiday
function 1.12
Return Select
Temperature settings
Setting of room
sensor infl. 1.11
Return Select
Main menu
Indoor temperature
settings 1
Return Select
Enhanced functions
As a user you have access to enhanced functions. Keep the
“Heat” button pressed down for five seconds and go into ”Menu”
to gain access to these displays. You will automatically return to
level 1 again after 30 seconds.
Keep the button pressed
down for 5 seconds.
Rego600 K2
020301 12:00:00 Fr
Heat Info Menu