manualshive.com logo in svg

Ivoclar Vivadent Programat EP 5010, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent Programat EP 5010 Скачать руководство пользователя страница 56

56

2. Conduct the data backup. 

Connect a USB stick to the furnace and press the 

[Execute]

  button.  

3. Complete the data backup. 

Data backup successful

 Data backup failed

   To return to the home screen, press either the 

[Home] 

touch button in the navigation bar or the HOME key on 

the membrane-sealed keypad.

5.4.4  Data backup

With the data backup function, individual programs and settings can be backed-up on a USB flash drive. We recommend 
using this feature, e.g. before a software update or before sending in the furnace for maintenance purposes.

Moreover, furnace data saved on a USB flash drive can be restored on the furnace. However, restoring only works on the 
same furnace with the identical serial number.

The data backup and data restoring procedures require only few steps:

1. Open the Data Backup menu.

Scroll to page 3 in the home screen and press the 

[Data Backup]

  

button.

5. Operation and Configuration

Содержание Programat EP 5010

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды