Ivoclar Vivadent Programat EP 5010, Руководство по эксплуатации

Страница: 44 / 96

44
5. Operation and Configuration
3. Load the furnace.
You can now load the firing chamber with the hot investment ring.
The IRT investment ring analysis starts immediately after loading of
the furnace:
– automatic identification of the investment ring size
– check of the investment ring preheating temperature.
For details regarding the IRT investment ring analysis see
Chapter 5.4.
2. Select the program.
5.3 Press programs and programming options
The furnace offers different press program ranges:
a. press programs for Ivoclar Vivadent materials
b. FPF – Fully automatic press function for IPS e.max Press materials
c. 20 free, individually adjustable press programs.
a) Press programs for Ivoclar Vivadent materials
When the furnace is delivered ex factory, the Ivoclar Vivadent programs already contain the recommended material
para meters. They cannot be deleted or overwritten. The parameters are not shown in the software.
b) FPF Fully automatic press function for IPS e.max Press materials
This function has been ideally coordinated with the IPS e.max Press materials. The ingot type is automatically recognized
and the press process is started fully automatically.
c) Free, individually adjustable press programs
Individual press programs can be freely programmed and renamed.
In case of software updates, individually changed parameters in free programs are NOT reset to the factory
settings or changed!
5.3.1 Program selection in the "Pressing" mode and with
activated IRT investment ring analysis
The program selection requires only a few steps:
1. Select the program type.
The automatic investment ring analysis is started as soon as the
furnace head is opened.
The automatic investment ring selection can be skipped by pressing
the
[Manual]
button. Continue with Chapter 5.3.2 item 3 for
further operation.