manualshive.com logo in svg

Ivoclar Vivadent Programat EP 5010, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent Programat EP 5010 Скачать руководство пользователя страница 49

49

1. Open the Settings menu.

Scroll to page 2 in the home screen and press the 

[Settings] 

button.

3. Change the brightness of the display. 

Press the touch button in the line "Display brightness".

2. Open the display brightness setting.  

The 

[Arrow] 

buttons are used to scroll through the Settings menu. 

Press the button until the setting "Display brightness" appears in the 
display.

4. Select the desired display brightness.  

in percent and confirm the entry with the green button or cancel the 
entry with the red button. 

The setting was changed. 

   To return to the home screen, press either the 

[Home] 

touch button in the navigation bar or the HOME key on 

the membrane-sealed keypad.

5.4  Advanced functions of the furnace

5.4.1 Settings

To reach the Settings menu, scroll to page 2 in the home screen and press the 

[Settings] 

button. 

Example: Changing the brightness of the display

5. Operation and Configuration

Содержание Programat EP 5010

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды