Ivoclar Vivadent Odyssey Navigator, Руководство пользователя

Страница: 13 / 38

3.1.6 Placing the laser unit in the docking cradle
Place the laser unit in the cradle by tipping the laser unit slightly
forward and inserting it into the cradle. Fig 3.1.6. Do not force
the unit into the cradle and be sure to place the fiber cord
through the cradle opening.
The Odyssey Navigator diode laser is supplied with a
rechargeable lithium polymer battery which provides up to
45 minutes continuous lasing or 8 hours stand-by time,
i.e. laser on, not being charged by cradle or AC power cord
.
THE LASER BATTERY MUST BE FULLY CHARGED
BEFORE INITIAL USE.
THE LASER CAN BE SWITCHED ON OR OFF FOR THE
BATTERY TO BE CHARGED.
Allow the battery to charge overnight before first use.
Recharging a completely discharged battery takes
approximately
5 hours .
3.1.7 Odyssey Navigator Remote Interlock
The Odyssey Navigator Laser is equipped with a Remote Interlock
Jack. The Remote Interlock Jack is provided so that a clinician
may install the laser in a dedicated laser treatment room such
that the laser will be interlocked with the entrance door of the
room. In such an interlocked installation, the laser would shut
off anytime the door is opened, hypothetically, to protect the
person’s eyes who is entering the room. It is recognized that such
installment is not facilitated nor required in many operatories
or clinics. To that end, the Remote Interlock is available to any
practitioner that requires or requests it. The Remote Interlock
Jack is located and clearly labeled on the side panel of the laser.
The miniphono jack is wired in the normally closed position;
meaning that no further action is required to operate the laser without the interlock loop. If the interlock loop is
desired you may purchase the loop from a local electronics store. You need only inform the local electronics store
that you require a mini (1/8”) miniphono jack wired into a normally closed momentary switch and select the switch
design that best suits your needs. To install the loop, install the switch on the door and simply plug the miniphono
jack into the Remote Interlock Jack on the side panel of the laser.
13
Navigator
3 W AT T D I O D E L A S E R
O D Y S S E Y
TM
®
LASER ASSEMBLY INSTRUCTIONS
Section 3
Fig 3.1.6
Fig 3.1.7
All manuals and user guides at all-guides.com