14
Curing times
HIGH POWER
1,200 mW/cm
2
± 10%
TURBO
2,000 mW/cm
2
± 10%
Restorative materials
Composites
• 2 mm
1)
IPS Empress Direct / IPS Empress Direct Flow
Tetric EvoCeram / Tetric EvoFlow
Tetric / Tetric Basic White
10 seconds
5 seconds
• 4 mm
2)
Tetric EvoCeram Bulk Fill / Tetric EvoFlow Bulk Fill
Tetric Basic White
10 seconds
5 seconds
Heliomolar / Heliomolar HB / Heliomolar Flow
All conventional composites
1)
15 seconds
2 x 5 seconds
Compomers
3)
Compoglass F / Compoglass Flow
20 seconds
2 x 5 seconds
Indirect restorations /
cementation materials
Variolink Esthetic LC
4)
/ Variolink Esthetic DC
5)
per mm ceramic:
10 seconds per surface
per mm ceramic:
5 seconds per surface
Multilink Automix
5)
/ SpeedCEM Plus
5)
per mm ceramic:
20 seconds per surface
per mm ceramic:
2 x 5 seconds per surface
Adhesives
AdheSE / Adhese Universal
ExciTE F/ ExciTE F DSC
Heliobond / Syntac
10 seconds
Use HIGH POWER
program
Temporary materials
Telio CS Link
Telio CS Inlay/Onlay
Telio Stains
Telio Add-On Flow
10 seconds per surface
10 seconds
10 seconds
15 seconds
5 seconds per surface
5 seconds
5 seconds
2 x 5 seconds
Miscellaneous
Helioseal / Helioseal F / Helioseal Clear
Heliosit Orthodontic
20 seconds
10 seconds
Use HIGH POWER
program
2 x 5 seconds
IPS Empress Direct Color
IPS Empress Direct Opaque
MultiCore Flow / Multicore HB
20 seconds
20 seconds
20 seconds
5 seconds
2 x 5 seconds
2 x 5 seconds
1) Applies to a maximum layer thickness of 2 mm and provided that
the Instructions for Use of the respective material do not state any other
recommendation (might be the case e.g. with dentin shades)
2) Applies to a maximum layer thickness of 4 mm and provided that
the Instructions for Use of the respective material do not state any other
recommendation (might be the case e.g. with dentin shades)
3) Applies to a maximum layer thickness of 3 mm
4) Applies to light-curing
5) Applies to dual-curing
