6
• Turquoise (5s) / Green (10s, 15s, 20s):
Battery fully charged
Curing capacity of approximately 20 minutes in the
High Power program and approximately 10 minutes in
the Turbo program.
• Orange:
Battery weak
Time/intensity can still be set and a polymerization time
of approximately 3 minutes in the High Power program
is left. Place the light into the charging base as soon as
possible.
• Red:
Battery completely discharged
The light can no longer be called up and the curing time
can no longer be set. However, the handpiece can be
used in the Click & Cure corded operation.
Acoustic signal – Setting the signal volume
With the light switched off, press the time/program
selection button for 5 seconds until a blue light appears.
The volume can be adjusted using the time/program
selection button. There is a selection of four volume
levels. The volume is saved by pressing the Start button.
With the handpiece switched on, the current charging status is shown on the handpiece as follows:
