10
Check the delivery for completeness and any possible
transportation damage (see delivery form). If parts are
damaged or missing, contact your Ivoclar Vivadent
representative.
Charging base
Before you switch on the device, make sure that the
voltage mentioned on the rating plate complies with
your local power supply.
Slide the connection plug of the power pack into the
socket on the underside of the charging base. Tilt it
slightly and apply slight pressure until you hear and feel
it snap into place. Place the charging base on a suitable,
flat table top.
3. Start-Up
Connect the power cord with the power supply and the
power pack. Make sure that the power cord is easily
accessible at all times and and can easily be disconnect-
ed from the power supply. The Power On indicator on
the power pack lights up in green and the illuminated
ring on the charging base briefly lights up in blue.
Handpiece
Remove the handpiece from its packaging and clean
the light probe and the handpiece (see chapter
Maintenance and Cleaning). The light probe can be
removed and reattached by slightly rotating it.
