manualshive.com logo in svg

Ivoclar Vivadent 747827AA, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent 747827AA Скачать руководство пользователя страница 7

7

1.  Introduction / Signs and Symbols

1.1 Introduction

Dear Customer

Thank you for having purchased the Programat P510. It is a state-of-the-art furnace for dental applications. The furnace 
has been designed according to the latest industry standards. Inappropriate use may damage the equipment and be 
 harmful to personnel. Please observe the relevant safety instructions and read the Operating Instructions carefully.

Enjoy working with the P510.

1.2  Signs and symbols contained in these Operating Instructions

The signs and symbols in these Operating Instructions facilitate the finding of important points and have the following 
meanings:

Symbol

Note

Risks and dangers

 

Important information

Contraindication

Burn hazard

Risk of crushing

The Operating Instructions must be read.

 

1.3  Notes regarding the Operating Instructions

Furnace concerned:   

Programat P510

Target group:  

 

Dental technologists, dental professionals

These Operating Instructions facilitate the correct, safe and economical use of the Programat P510 furnace. Should you 
lose the Operating Instructions, extra copies can be ordered at a nominal fee from your local Ivoclar Vivadent Service 
Center or downloaded from 

www.ivoclarvivadent.com

.

Содержание 747827AA

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды