manualshive.com logo in svg

Ivoclar Vivadent 747827AA, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent 747827AA Скачать руководство пользователя страница 21

21

4.5.2  Start screen and self-test

Immediately after switching on, the display shows the start screen for  
a few seconds. Subsequently, the furnace conducts an automatic self-
test. The performance of all furnace components is automatically 
checked.  

The following functions are checked:

Functions 

 

Furnace head test

Furnace head test is in progress.

The furnace head test was successful.

The furnace head test failed. Please note the error message on the 
 display.

Vacuum test

Vacuum test is in progress.

The vacuum test was successful.

The vacuum test failed. Please note the error message on the display.

IRT test

IRT test is in progress.

The IRT test was successful.

The IRT test failed. Please note the error message on the display.

The following information is displayed:

Information  

 

Temperature calibration  

Temperature calibration of the furnace is not required.

Some time has passed since the last calibration. Please conduct a 
 calibration  procedure. 

Power supply

The power supply voltage is in the acceptable range.

The power supply is outside the acceptable range.

Software version

The currently installed software version is displayed.

If the self-test was successful, the furnace will automatically display the home screen. 

If the program recognizes a malfunction during the test, a  
corresponding error message with the corresponding rectification 
information appears in the display.

The acoustic signal and the error message can be acknowledged with 
the corresponding buttons.

4. Installation and Initial Start-Up

Содержание 747827AA

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды